3D model to DraftingManufacture in China, delivery to the worldFinite element AnalysisFinite element mesh

Component Repair(Life Extension)GE Frame E/B 6FA, 9FA GE10/PGT10/PGT16/PGT25(100,000hr+)SIEMENS V84 V94 2000ELM1500/2500/6000Solar Saturn/Centaur/Taurus/MarsGT8/11N1/13D/13EGT11N2/11NMTB5000 SGT100/200SGT400/600/700W251 W501FCapable of CI, HGPI and MI for Frame E/B F class unitsOnsite rotor inspection and onsite repair /Onsite bucket replacement /Rotor life assessment and extensionCompressor blade onsite NDT inspectionWe have developed combustor dynamics monitor and fulfilled combustion tuning

The gas turbine units in many regions are operating at partial load with many hours in a year. Most time the power plants do not take any action to optimize performance. Actually, there are always some solutions to improve output or efficiency to these power plants so that the plants may earn more profit or save fuel cost in a significant extent in a year. Gas Aero Power can provide many solutions in performance optimization, such as IGV optimization, Part load efficiency (PLE), Inlet chilling

Gas turbine combined cycle plants will produce noticeable high emission with 50min to 3 hours during start up, and the CCPP plant has received the complain from local residents.After Gas Aero Power modified the start up loading path, the high emission time duration has been reduced to 20 minutes.

For fast response to grid power requirement, Gas turbine combined cycle plants would like to reduce combined cycle unit start up time.After Gas Aero Power modified the start up loading path, the Gas turbine combined cycle plant hot startup time duration has been reduced from 55 minutes to 25 minutes. This solution will not effect gas turbine life.

The gas fuel supply pressure is usually set at the maximum gas turbine load operation condition, which may require fuel gas compressor running, and the plant auxiliary power cost will be increased correspondingly.Gas Aero power has provided the fuel gas supply pressure reduction solution by modifying fuel gas system, therefore, the fuel gas compressor can be turned off or operates less hours in the three months of summer, saving the plant operation cost.

Variation of the fuel gas composition of a gas turbine will affect the fuel heating value, fuel flow rate and nozzle pressure ratio under standard operation condition, and thus affect the combustion dynamic of gas turbine operation.Based on the fuel composition provided by the plant customer, after studying and modifying the fuel nozzle and fuel system, Gas Aero Power has adjusted the entire fuel system to a better appropriate operation situation.

Steel mills around the world produce coke oven gas and blast furnace gas, which contain a high proportion of H2 and CO that can be used as low BTU gas turbine fuel for power generation. To meet the needs of power plant customers, Gas Aero Power, together with its partners, has designed and manufactured dual-channel nozzles and water injection system, which has increased the power output of the steel plant's original gas turbines by more than 7%.

An F class GTCC unit tripped during the transfer from oil to gas fuel operation, and some condensate was found inside fuel gas system. This is because the gas fuel C6+ concentration was 10 times of that of initial designed gas fuel,.After quantitative study of several solutions, communicated with dozens of manufacturers , including gas filtering, gas heating, membrane supplier, etc, Gas Aero Power provided the final fuel gas treatment system modification solution which meet the power plant cust

Full Range of Capital PartsCombustion Parts Hot Gas Path PartsCompressor PartsMain frameGE: 5/6B7B/7E9E/7FA9FA6FA/GT13/GT24GT26SIEMENS: V94.22000E/94.3A4000F, SGT300/400/600/700/800Ansaldo: AE94.2Solar: Saturn/Centaur/Taurus/MarsCapital partsConsumable PartsAuxiliariesRepair ServicesRepair Solution for Combustion and Hot Gath Path Parts(Class B, Class E, Class F) Rotor Field Inspection and Maintenance Ability Component Life Assessment and Life Extension Capability Fuel Gas Control Valve Repairi